Paint Decontamination and Acid Neutralization System

From DetailingWiki

Paint Decontamination and Acid Neutralization System

Studies by vehicle manufactures and OEM paint suppliers have shown that failure to remove environmental contaminants from a paint film surafce can cause premature degradation of the paint system. While clay products are useful for overspray, they cannot deep clean the surface and pores of the paint. This can only be accomplishedwith a thorough chemical decontamination system.

Auto International’s Paint Neutralization System is a three step neutralization and wash system formulated to remove industrial fallout, rail dust, hard water deposits, acid rain residue and other forms of pollutants.

* Benefits: Leaves paint surface uncontaminated for application of wax, polish or sealant. Allows for correct repair of superficial paint damage, reduces buff time on pre-owned vehicles.

Signs of Paint Surface Contamination-

• Dark coloured specks

• Brown or Orange (rust) coloured stains or specks

• Yellow stains

• Small metal coloured flecks

• Rough texture

• ‘Water spots’ or marks

• Surface etching

• Oxidation

Directions:

• Three simple wash steps, no rubbing; see product containers for more details or visit the web site.

System comprises:

* A is an acid neutralizer that removes waxes, storage stains and neutralizes acid deposits, a solution of an 8:1 concentrate /clean water , allow to dwell for 5-7 minutes before rinsing.

* B is an alkaline neutralizer that is a blend of acids, which deep cleans painted surfaces to remove alkaline deposits and safely dissolves the ferrous metal particles bond with the paint so that they can be rinsed away. Allow product to dwell for 5-7 minutes, works well with detailer’s clay to remove contaminants. All necessary safety precautions should be taken whilst using this product

* C is a pH 7.0 surface conditioner a 128:1 concentrate vehicle wash and the third step in the neutralization process, which ensures any chemical residues, are neutralized and rinsed away.

Use separate wash mitt for products A and C, the use of the ValuGard Dispenser trigger spray container for products will ensure correct mix ratio and maximum economy

Automotive paint is porous, by using an acid solution (A) on the paint surface the micro-fissures (‘pores’) are expanded, the acid / water is subjected to an exothermic reaction (heat is evolved when water and acid mix together), which means it agitates and loosens the particles allowing them to be encapsulated by detailer’s clay (as opposed to being sheared off, by abrasion)

The neutralizer (B) then enters the subsurface of the paint film and neutralizes any caustic compounds generated by ferrous particles that have penetrated paint film.

Methodology:

*Rinse •Complete rinse vehicle top to bottom. •Remove excess soil. •Be certain vehicle surfaces are cool to the touch.

* (A) Acid Neutralizer •Mix acid neutralizer- 16 ounces of product to each gallon of water. •If you are using a proportioner, simply dispense 1/2 gallon of solution into bucket. •Using a dedicated wash mitt, thoroughly wash vehicle with solution top to bottom. •Allow to dwell 5-7minutes. •Do not allow solution to dry on vehicle

* Rinse/Dry •Rinse vehicle thoroughly top to bottom. •Using a waffle-weave towel, dry horizontal surfaces •If rinse water continues to ’Bead’ repeat Step 2.

* (B) Alkaline Neutralizer •Using a clean dry sponge or wax applicator pad, apply Alkaline Neutralizer to all paint surfaces including roof, hood, deck lid, and the tops of the fenders and quarters. •Allow to dwell 5-7 minutes. •Do not allow solution to dry on vehicle

* Rinse/Inspect •Rinse thoroughly. •Visually and manually (by touch) inspect for complete removal. •Repeat Step 4 if necessary.

* C) Detail Wash (pH 7.0 Surface Conditioner) •Mix Detail Wash-One part product to 128 parts water (i.e. one ounce of product to each gallon of water). •Wash entire vehicle using a clean dedicated wash mitt from top to bottom, including the glass, bumpers, etc.

* Rinse/Dry •Rinse and dry thoroughly.

* Notes: 1.Always: Wear gloves and eye protection 2.Use separate buckets and wash mitts for Acid Neutralizer and Detail Wash 3.Never: Use on hot surfaces or in direct sun light 4.Ingest chemical products 5.Allow products to dwell longer than 7 minutes

* Tech Tip: 1.Always use separate wash mitt for products "A" and "C". 2.The use of the ValuGard Dispenser system for products "A" and "C" will ensure correct mix ratio and maximum economy. 3.Other prep or reconditioning operations should be performed during product dwell times for best use of labor time.

Information resource-

• Auto Internationals website - [1]

• “Automotive Detailing Inside & Out, A Knowledge Base for the Perfectionist"– by Jon Miller

© TOGWT ™ Ltd Copyright 2002-2008, all rights reserved

© All original material in this article is copyright, unless otherwise stated, and may be copied and distributed for non-commercial purposes only as long as the source of the material is stated and a reference to © TOGWT ™ Ltd Copyright 2002-2008, all rights reserved, is included